VACUUM ASSIGNMENT Example | Topics and Well Written Essays - 2500 words - 1

VACUUM - Assignment Examplewere developed and used to determine the stringent demands on these semiconductor devices. However, the semiconductor films produced by these processes were not structurally equivalent t the bulk material and hence were not of device grade. The fuss associated with vapor phase deposition processes was differential vapor pressure of different constituents. For example vapor pressure of Ga and As differs by as often as two orders of magnitude at temperatures useful for thin film deposition. Therefore, to achieve equal vapor pressure and hence equal flux of arrival of Ga and As on the substrate by thermal evaporation of separate As and Ga sources will require too stringent assert on the temperature to be achieved 1. Many research groups tried to overcome this limitation by innovative approaches. One remarkable approach by Collins et al 2 involved using two separate crucibles containing Ga and Sb to deposit films of GaSb onto a glass substrate by evaporati ng these substances. His basic idea was to exploit pass in angular decrease in the flux and hence to place the substrate at an angular location with respect to the individual crucibles where the two nuclear fluxes will be equal and hence a stoichiometric film will be produced. However, the films he could produce were polycrystalline. Gnter K. G. 3 tried to arrive at appropriate vapor ratio by control of the temperatures of the evaporating species and the substrate separately. However, he could also not produce quality ordered films. During those days (1960 s) it was not informal to characterize the condition of the substrate, the quality of the vacuum and the composition and crystallinity of the films. The researchers had to do negatron-diffraction after growing the films and this was taking much longer. It was development of small mass spectrometers, auger electron spectroscopy and compact electron diffraction instruments which made it